Disclaimer: We may receive a commission for products purchased through some links in this article.
Best Wakesurfing Boards Reviewed
If you have never experienced the enchanting bliss of slipping along the surface of a curling wave, absurd fun awaits. Really, life is just passing you by.
Okay, that’s probably a little dramatic. But seriously, it’s incredibly fun, good exercise, and less complicated to get into than you think.
It you enjoy the world or watersports, wakesurfing is right up your alley.
At bare minimum, you will need to purchase a wakesurfing board. Now, which one will be the best wakesurfing board for your particular use is going to depend on a few important details.
You don’t necessarily need a professional-level board, but the best wakesurfing board for you will hinge on your experience, how often you wakesurf, and whether you are a beginner or are looking for the best board for tricks.
When choosing a board, you need to consider the style of board, before looking at rails, tail, and fin, as well as the flex and length of the board. One other highly recommended item would be the addition of a wake shaper to help your boat push up big waves.
Top Wakesurfing Board Features To Consider
- Board Style –If you’re just starting out in wakeboarding, you should opt for surf wake surfing boards. These boards pick up pace quickly and they offer greater stability over the water. Skim boards are smaller, which makes them easier to maneuver, enabling you to more easily perform wakesurfing tricks. Hybrid boards fall between these two styles: they offer greater stability than a skim board, but can be used to perform some basic and intermediate tricks.
- Rail –The rail of the board determines how much water passes over the board while it is in the water. A full rail is thick and offers excellent stability, but at the cost of maneuverability. It will be slower across the water making it difficult to perform advanced tricks. A hard rail is thinner and therefore produces less drag – it enables the boarder to perform wakesurfing tricks and picks up speed more quickly. A blended rail is a medium width, and it offers a combination of speed and agility: blended rails are the most popular type of wakeboard.
- Tail Shapes –The tail of the board affects how the board behaves as it travels across the water, as well as the amount of balance it provides. The main choices of tail are:
Bat Tail – The bat tail is wide and offers stability over the water. Best suited to smaller waves, this type of tail is not commonly seen on modern wakeboards
Diamond Tail – A hybrid, of sorts, between the pin and the squash tail, the diamond tail is one of the most popular designs of modern wakeboard. It provides a good combination of speed and agility, so it is suitable for all skill levels and wave types.
Half-Moon Tail – The half-moon tail is ideal for those looking to perform tricks. It can be used in any wave size and boards featuring this style of tail are easy to turn.
Pin Tail – The pin tail is the smallest of the tail designs. It drops deep into the water, which is ideal for stability in big waves, but less suitable for smaller waves.
Round Tail – The round tail can be used in either small or large waves, and because it has a greater surface area than that of the pin tail, it can be used to perform some of the simpler tricks.
Square Tail – Not suitable for complex tricks, the square tail is designed for speed runs.
Squash Tail – The squash tail is another design aimed at speed runs, and it can be used in any wave type and water condition.
Swallow Tail – The swallow tail works well in small to medium waves, and it will allow the boarder to try some basic tricks will hitting decent speeds.
- Fin –Most fin layouts have between one and four individual fins, and they determine the type of wave that a board is best suited to. Single fins are designed for control and are best suited to large waves. Twin fins are ideal for performing tricks on smaller waves. The three finned board offers control while generating speed and is better suited to large waves. The quad-fin design also provides speed over large waves.
- Rocker –The rocker is the type of arc on the base of the board. A continuous rocker is a single flowing arc from front to back, which is the preferred style if you are going to remain on the water and avoid catching air. A 3-stage rocker effectively has three sections to its arc, is more difficult to control, but it does offer greater fun and more capability in the air.
- Length –Length of the board determines stability and ability to do tricks. Shorter boards, usually those around 130cm are better for tricks because they are lighter and more maneuverable. Long boards, measuring up to 145cm are faster and preferred by beginners, but it is difficult to perform tricks because of their cumbersome size.
- Flex –Flex is the amount of flexibility in the board. The more flexible a board, the more impressive the trips and flicks you will be able to pull.
Top Wakesurfing Board Comparison Chart
Best Wakesurfing Board
The shim board is ideal for intermediate and advanced boarders. Longer boards are suited to beginners because they enable the rider greater stability, but they are also difficult to throw around and maneuver across the surface of the water. They are heavier, which makes them difficult to pick up and carry for big air. Finally, bigger boards tend to weigh more, although this is also dictated by the materials used in their construction. A heavier board will have a greater and harder impact on the legs, especially the calves, and can be overwhelming for the beginner.
The Hyperlite Shim board is shorter and lighter than a beginner board. Therefore, it is more maneuverable across the water, easier to lift off the surface of the water, and it allows the boarder to stay behind the boat for longer without becoming too tired. They glide at speed, but they are also lightweight and easy to maneuver, which means that they are ideal for pulling wakesurfing tricks and grabbing insane air. The Hyperlite 2019 Shim Wakesurfer is, in many ways, a hybrid design. It allows for speed and agility, but it incorporates a fast rocker with a short profile.
You will be able to gather speed, but the board will remain agile for shredding and for pulling tricks. It has a customizable fin layout, enabling a single or triple-fin layout. Single- and triple-fin layouts are suited to use in big waves, and they allow impressive takeoff from the surface. Thanks to the central fin in both layouts, this board enables the rider to retain stability even through deep wake. The Shim’s ability to pick up speed, and its impressive trick capabilities, mean that it can be used by intermediate and advanced boarders alike.
The layered glass offers improved durability, so you won’t have to buy a new board after a few weekends on the water. Traditional fibers will separate with regular and prolonged use, while the fiberglass construction of this board means that you will enjoy the same great quality every time you head out on the water.
Its flexibility means that the Shim Wakesurfer is one of the best wake surfing boards for families and groups that share a single board. Simply change out the fin layout and you can enjoy the type of ride you prefer without having to invest in two boards. The Shim can also be used with or without a cable, and because it comes from Hyperlite, it has the heritage of one of the best known companies in the wakeboarding industry.
Here is a great video showing the Hyperlite Shim Wakesurf Board in action:
- THE BOARD: The Shim board is perfect for intermediate to advanced wakesurfing riders looking to take their skills to the next level. Overall, this new board is the best of all worlds and one that a wakesurf enthusiast can't pass up.
- STRUCTURE: Our shim board features our all new DuraShell Technology which combines the buoyancy and feel of a high-end EPS board and the durability of a compression molded shape. Our board also includes lap construction, machined EVA traction, single concave base contour, and mellow tail channels.
- STYLE: The Shim has a fast rocker allowing it to carry speed anywhere on the curl and its shorter profile makes it super maneuverable for rotational and air tricks. This board has the style and function that will help you shred the wake. The Shim is the ultimate shred board.
- FIBERGLASS: Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.
- SIZING: This board is best suited for surfers weighing 120 pounds and above. Total surface area is 1042 inches. The center width is 21.5 inches and has a 2.1â tip and .95â tail. Board includes 2x 1.5 inch fish fins and 2x 3.5 inch torq fins.
The CWB Ride is one of the best wakesurf boards for beginners. It has a rounded nose and, like the Hyperlite, it has three fins that can be customized to a single or triple fin layout.
The board is 5”2′. Its rigid compression molded design means that the Ride is easier to control than a lot of boards, so it is a great all-rounder and an ideal board for those that are just starting out. Additionally, the Ride has a double rail. This offers excellent traction on the water, and it means that the rider will enjoy predictable turns and will be able to retain their line in any conditions, even in more challenging wake conditions.
The compression molded design is not only ideal for beginners, but this type of design will fit in most wake or surf racks so it should be easy to mount the board to your car and carry it to the waterside.
It even comes complete with a a 20 foot surf rope, so you won’t have to buy any extras before your first tow. This is great for beginners and it enables first time riders to learn how to get up and mobile.
However, because it is a long board, it shouldn’t be used for extended periods and may not be suitable for big air or complicated wakesurfing tricks. These boards are less maneuverable than smaller boards, and while this does offer greater stability, it sacrifices the agility that is required for quickly and easily pulling tricks. Longer boards can also lead to fatigue after an extended period of time in the water. However, the features of the Ride wakeboard make it a top wakesurf board for beginners.
The board has 3 EVA tail pads. EVA is lightweight and it does not absorb water. It offers increased traction when compared to other materials.
- Surf style allows for easy traction and predictable turns
- Compression molded
- Double edge rail
- Three 1.75' tail fins
- CNC diamond cut EVA pad with kick tail
Wakeboarding isn’t just a great activity for experienced adults. It is an exciting and energetic activity for the kids, and if you want to get your son or daughter into wakeboarding, you need to find a durable, small board, that offers stability and durability. They won’t be jumping straight into big waves, and they are unlikely to be landing big air or pulling insane tricks straight away.
This 3”9′ kid’s wakesurf board is layered with fiberglass. It features a squash tail design, which means that it is suitable in any wave size and water condition, providing stability and control. This is the preferred tail design for a kid’s wakesurf board because of the stability and control that it offers, and because it is suitable for the construction of smaller boards.
It has a customizable triple-fin setup, which means that your son or daughter can alter the setup according to how well they are advancing. Both the single- and triple-fin layout offer extra stability by using the central fin to stabilize the ride. The monocoque construction provides greater protection against side impacts without the board being torn to shreds. This further helps ensure that the rider stays upright even in challenging wake conditions.
It is a hybrid board, designed for the child that is just starting out or that has a little experience in the wake. Your child will have plenty of fun, be able to build up reasonable speed, and start to get to grips with some basic tricks, while still enjoying a degree of control that ensures that they can pick up the basics along the way.
- Kids Specific Squash Tail Design
- Dual Concave Base
- Rolled Edge Profile, Machined EVA Traction Pad
- Monocoque Construction - Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination
- Layered Glass - Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.
The 52” Rambler wakesurfing board is a skimmer board, with a nearly flat base. It will pick up really high speeds but is priced very competitively, and its skateboard feel allows boarders to perform impressive tricks too.
The board measures 52” x 20.8” and is made with a durable Polyurethane Resin Core. It is suitable for all riders, including those well over 6ft and weighing more than 160lbs. It has a three fin setup and will dart through waves quickly and easily. It is a big board and this, combined with the fin layout, means that it will retain stability and allow the boarder to stay upright.
The fingerprint textured deck pad allows the rider to grab the board more easily. The textured finish prevents the board from sliding too easily through fingers, which allows for grab tricks and makes it possible to grab some air. The fingerprint texture is billed as no-wax, which makes it convenient with less preparation time before you can get out on the water. If you want to enjoy the full thrill and enjoyment of wakeboarding, the 52” Rambler is perfect, especially if you’re on the taller side.
Despite its near flat base, it can still be used to grab some air and pull some impressive tricks. If you’re looking for a fun, inexpensive wakeboard and you want to rip through the wake and tear through the water at speed, this offers a great compromise.
- [SPECS] : 52” Rambler Wakesurf Board is 52” inches long by 20.8 inches wide and is ready for all level riders 160lbs+ | Skimboard Style makes for a snappy and fast board capable of ripping through wake waves | Constructed with a flat base for crazy speed, and 3 fin thruster setup fast and sharp skateboard style feel | Trick focused shape for all the experience chargers out there looking for an epic new wakesurf board or skimboard
- [DESIGN] : The 52” Rambler Wakesurf Board is made with a Polyurethane Resin Core that is compression molded to create our awesome low-profile sleek design that is Incredibly Strong and Long Lasting | Custom No-Wax Needed Fingerprint Texture EVA Top Deck with Black and Digital Camo Foam | 3 Fin Thruster Set-Up for Speed and Precise Control | Incredibly easy to shuvit and pop a few airs
- [UNIQUE FEATURES] : The 52” Rambler shape features a twin-ish outline to enable regular and switch riding for skilled riders | Relatively flat bottom deck with slight rocker in tail and nose means this thing hauls with surprisingly great control
- [PURCHASE INCLUDES] : The 52” Rambler Wakesurf Board will include (1) 52” Wakesurf Board + (1) 1” Center Skim Fin + (1) Pre-Installed Precision Cut Eva Fingerprint Textured Deck Pad
- [100% SATISFACTION GUARANTEE] : USA DESIGNED AND RISK FREE RETURN: 30 day guarantee and 1 year warranty on materials. We are a local California-based company with American Family Friendly Customer Service -||- Our Wakesurf Boards are made with high quality unique materials -||- We firmly believe our Wakesurf Boards are the best in the market with incredible performance, high quality, and premium design as well as being the cleanest looking board on the wake! 🙂
You don’t have to spend a fortune to have a good time being pulled behind a boat. The California Board Company Wake Surfer is cheap but offers massive levels of enjoyment for you and the family. It won’t be suitable for competitive level wake boarding, but if you’re looking for a great way to enjoy some quality time on the water, without breaking the bank, then look no further.
The California Board Company Wake Surfer is a 54” wake surfer board made from an HD waterproof EDS core with resin coated wood stringers. It has a triple-fin layout and a built in tail wedge, and has EVA traction finger pads. The finger pads and tail wedge allow for grabs and enable the rider to start pulling tricks and landing air.
It costs less than most competitors, and its foam construction means that it is best suited to beginners and those that like to head out for the occasional weekend in the boat. If you’re looking to take on big waves or achieve big air, this might not be the best option. Foam boards, though, are excellent for the beginner, not only because they are lighter so are easier to pick up and haul into the air but because they are more forgiving when you bang legs and bodies against them. It also means that any knocks to the board will be less expensive to repair or replace in the long run.
- High density ixpe xpe foam graphic deck with waterproof eps foam core
- 3 wood stringers for flexibility and durability
- High density polyethylene slick graphic bottom
- Traction pad with built in tail wedge
- Nylon fin box with 3 removable fins